Hello,
i have execute a bad command and i would like to recover my password. when i boot in single-mode i do "boot -s" and after recovery when i arrive on the CLI mode, i 've a problem :
Performing checkout of management services ...
NOTE: Once in the CLI, you will need to enter configuration mode using
NOTE: the 'configure' command to make any required changes. For example,
NOTE: to reset the root password, type:
NOTE: configure
NOTE: set system root-authentication plain-text-password
NOTE: (enter the new password when asked)
NOTE: commit
NOTE: exit
NOTE: exit
NOTE: When you exit the CLI, you will be asked if you want to reboot
NOTE: the system
Starting CLI ...
root> panic: Hardware watchdog timeout NMI
cpuid = 0
KDB: stack backtrace:
SP 0x0: not in kernel
0x0+0x0 (0,0,0,0) ra 0 sz 0
pid 22
Uptime: 3m6s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
i've that after 2s and i can't use the cli single mode to recover the root password
i use srx 100 with 10.0R2.10 and i tested with 10.1R1.8
thanks for your help