05-15-2009 09:28 AM
On a J-series (J2350) using 9.5R1.8 I used this OID to get CPU information
After enabling chassis clustering, it no longer works. Nothing under .220.127.116.11.4.1.2636.3.1 works at all, in fact. The mib is browsable here:
And it contains all important info about cpu, memory, and other system information. I spent a few hours going through the mibs:
and do not see any alternate mib. SNMP works, I can still poll interfaces, but I will need a way to get cpu/memory information via snmp polling.
05-16-2009 12:31 PM
I think this should work. At one point jnxOperatingCPU OID was not supported in chassis cluster mode. But that should be supported by 9.5R1. I would recommend opening a case with JTAC and have them investigate this.
05-19-2009 06:04 AM
05-19-2009 10:36 PM - edited 05-19-2009 10:36 PM
Actually I found out that this is supported on SRX. But for J-Series this required an enhancement request. There is already an ER opened for this and is currently under review. So this should be included in a future JUNOS release TBD.
09-02-2009 11:46 AM
you could use something like that e.g.:
MIB Importer is able to import SNMPv1 and SNMPv2 MIB files. It is fairly easy to convert a MIB file into an OID library: