Junos OS

Hello everyone,

Can anyone help to explain my questions

Does the M10i support Site-to-site VPN?

If yes, do we need any addition card or license for site-to-site vpn on M10i?

Thank you!

Hello,

Yes it does.

Depending on Your budget and  JUNOS version, You will need either 1 of below:

1/ ES-PIC http://www.juniper.net/us/en/local/pdf/datasheets/1000089-en.pdf 

2/ AS-PIC http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/general/pic-m10i-eol-adaptive-services.html

3/ AS2-PIC http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/general/pic-m10i-eol-adaptive-services-ii.html

4/ MS-PIC http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/general/pic-m10i-multiservices-100.html

Yes, you will need a honor-based license as well if You want to use IKE. Manual IPSec does not require a license.

HTH

Thanks
Alex

Hi Alex,

I'm a bit confused.

Could you help to explain about the IKE. I don't know what's it mean in your situation.

I'm know that when I configure VPN site-to-site on 2 SRXs I have IKE is a part of VPN configuration.

Thank you Alex and sorry because my English is not native language.

Hi there,

"I have IKE is a part of VPN configuration" == You use IKE

You use IKE == You need a license to do that on M10i (along with AS|ES|MS-PIC hardware).

HTH

Thanks
Alex

Hi Alex,

Could you please give me some site-to-site VPN configuration without use of IKE on SRX or MX.

Hello,

Please check out this link kb.juniper.net/InfoCenter/index?page=content&id=KB21221 

HTH

Thanks

Alex