Junos OS

last person joined: 4 days ago 

Ask questions and share experiences about Junos OS.

  • 1.  Stacking Switches

    Posted 06-30-2014 10:41

    How can I stack mutliple Juniper Switches (EX4200)?



  • 2.  RE: Stacking Switches

     
    Posted 06-30-2014 22:45

    Yes and these links should give you all the information that you need:

     

    http://www.juniper.net/techpubs/en_US/junos12.3/topics/concept/virtual-chassis-ex4200-components.html

     

    http://www.juniper.net/techpubs/en_US/junos12.3/topics/task/configuration/virtual-chassis-ex4200-cli.html

     

    http://www.juniper.net/techpubs/en_US/junos12.3/topics/task/installation/virtual-chassis-ex4200-member-adding-cli.html

     

     

     

    =====

    If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.



  • 3.  RE: Stacking Switches

    Posted 07-02-2014 20:17

    Just an addtional comment, go ahead and upgrade them all to the same recommended version first. Determine if you want to use preprovisioned or Dynamic election for master and backup. Depending on choice, bring master first then all others. Simply connecting the VCP places them in Stack mode/VC. proceed with your desired configuration. Be sure to configure features such as GRES, NSR, NSB etc.