Junos
Reply
red
Visitor
red
Posts: 2
Registered: ‎01-22-2008
0
Accepted Solution

T320 log, who can help me expain it ??

hi all
the log below

######3
Jan 22 06:35:06 fpc0 JBUS: FPGA irq handler called, no outstanding interrupts, status=0x00000000, enable=0x0000f800

> show version

Model: t320
JUNOS Base OS boot [8.4R2.4]
JUNOS Base OS Software Suite [8.4R2.4]
JUNOS Kernel Software Suite [8.4R2.4]
JUNOS Crypto Software Suite [8.4R2.4]
JUNOS Packet Forwarding Engine Support (M/T Common) [8.4R2.4]
JUNOS Packet Forwarding Engine Support (T-Series) [8.4R2.4]
JUNOS Online Documentation [8.4R2.4]
JUNOS Routing Software Suite [8.4R2.4]
########

can somebody expain it to me ???
Trusted Contributor
gdavies
Posts: 115
Registered: ‎11-05-2007
0

Re: T320 log, who can help me expain it ??

Hi Red,

What's your logging configuration? I'm not 100% sure, but that looks like some of the kind of logs returned when logging is set to 'all all' that is just saying everything is running as normal :-)

There is no reason to set logging to 'all all' on a permanent basis. The default configuration is entirely appropriate for all normal circumstances and it's only really necessary to increase logging under the advice of JTAC.

Rgds,

Guy
---
Guy Davies
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.