Hi Experts,
I have a MX10-t router, but could not find an option to specify IPv6 probe-type or target address (inet6-address). Any ideas?
mpls@junospeMX10# run show version
Model: mx10-t
Junos: 13.3R3.6
JUNOS Base OS boot [13.3R3.6]
JUNOS Base OS Software Suite [13.3R3.6]
JUNOS Kernel Software Suite [13.3R3.6]
JUNOS Services RPM [13.3R3.6]
When I try to set a IPv6 address for the target address, I get an error that it is invalid IP address
[edit services rpm probe TEST test TEST]
mpls@junospeMX10# set target ?
Possible completions:
<[Enter]> Execute this command
address Address of target host
url Fully formed target URL
| Pipe through a command
[edit services rpm probe TEST test TEST]
mpls@junospeMX10# set target address 200:1:2:3::1
^
invalid ip address or hostname: 200:1:2:3::1 at '200:1:2:3::1'
Also, IPv6 probe-type could not be seen
mpls@junospeMX10# set probe-type ?
Possible completions:
http-get Perform HTTP Get request at target URL
http-metadata-get Perform HTTP Get request of metadata at target URL
icmp-ping Send ICMP echo request to target address
icmp-ping-timestamp Send ICMP timestamp request to target address
tcp-ping Send TCP packets to target
udp-ping Send UDP packets to target
udp-ping-timestamp Send UDP packets with timestamp to target
Regards
Mary