Junos OS

Our SRX3600 shows two different timezones for the 'show system uptime' command in the 'System booted' line. See output at the bottom.

Both have a configuration of:

               set system time-zone Europe/Berlin

Why does node0 have a timezone of CET and node1 has a timezone of CEST?

We wish that both nodes be configured in exactly the same way and thus also for the timezones?

Thank you for any advice.

node0:
--------------------------------------------------------------------------
Current time: 2015-02-16 11:09:28 CET
System booted: 2014-12-06 11:24:28 CET (10w1d 23:45 ago)
Protocols started: 2014-12-13 17:03:58 CET (9w1d 18:05 ago)
Last configured: 2015-01-10 15:40:25 CET (5w1d 19:29 ago) by ti02040
11:09AM  up 71 days, 23:45, 1 user, load averages: 0.04, 0.07, 0.07

node1:
--------------------------------------------------------------------------
Current time: 2015-02-16 11:09:24 CET
System booted: 2014-04-26 14:18:12 CEST (42w1d 21:51 ago)
Last configured: 2015-01-10 15:40:22 CET (5w1d 19:29 ago) by root
11:09AM  up 295 days, 21:51, 1 user, load averages: 0.09, 0.06, 0.02

Shouldn'y you be looking at Current Time and confirm the timezone is the same? In your case, it is.

Seems that it's recording the time zone(and daylight saving time) when booted.

Node1 booted when CEST was active(march 30 2014 - october 26 2014) and node0 booted when CET was active(26 oct 2014 - 29 march 2015).

=====

If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.