Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
Hi all,
start from the basic knowledge of Juniper.
what is Chassis (make it easy to understand,please) ?
and what is Virtual Chassis used for ?
thanks
Sam
hey, i found this link.
should be more clear if you guy explain to make it easy.
http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/concept/virtual-chassis-hardware-understanding.html
sam
in its simpliest form, a virtual chassis is two or more (depening of if your talking about firewalls or switches) devices that are connected togeather and act as one logical unit.
If you're familar with Cisco its similar to a stack of switches.
Virtual Chassis is a method to make individual switches behave as if they are blades in a chassis switch matrix. The group of switches in the chassis join together into a single device (up to ten switches). They are considered a single device and you configure all of them as if they were one large switch.
See these pages for a longer description of the components and configuration. http://www.juniper.net/techpubs/en_US/junos10.3/topics/concept/virtual-chassis-components.html http://www.juniper.net/techpubs/en_US/junos10.3/topics/concept/virtual-chassis-configuration.html http://www.juniper.net/techpubs/en_US/junos10.3/topics/example/virtual-chassis-basic.html
Thank you all,
i got it now.
Regards,