04-29-2011 01:26 AM
I've had following error on a EX4200-24t:. (It is not a member of a Virtual Chassis.)
rend_dlinit: not a proper library: /usr/lib/render//libvccpd-render.so: Cannot open "/usr/lib/render
There was no routing possible (It's normal because the switch got in linecard-mode) How this is possible, I don't know. Software version is 10.3
I've recoverd the switch by reinstalling the software through an USB-stick. Does anyone know why the switch gave me this problem???
Thanks in advance!
Solved! Go to Solution.
04-30-2011 01:41 AM
I don't get your answer I think...
Do you mean the following:
When you have the following thing configured on the ex4200. It won't route that traffic when you have soft-version 10.3???
Set interfaces vlan unit 100 family inet address 192.168.0.1/24
Set interfaces vlan unit 200 family inet address 192.168.1.1/24
Set vlans test vlan-id 100
set vlans test interface ge-0/0/0
Set vlans test1 vlan-id 200
set vlans test interface ge-0/0/1
04-30-2011 05:34 AM
RVI is a basic feature of the EX switch line since the initial release. From what you show above it appears that the Junos installation is corrupt.
Maybe the recover from a failed software installation procedure will help.
Be sure to save out a copy of your current configuration in case this gets lost in the processes.
Rescue config will put a copy on the device you can pull from.
system configuration rescue save
KB12022 shows how to put a copy to a usb disk
Senior IP Engineer - DQE Communications Pittsburgh, PA
JNCIA-ER JNCIA-EX JNCIS-SEC JNCIP-SEC JNCSP-SEC
JNCIS-FWV JNCIS-SSL JNCDA
ACE PanOS 6
MCP - Managing Server 2003 MCP - Windows XP Professional
MCTS Windows 7