Junos OS

last person joined: 23 hours ago 

Ask questions and share experiences about Junos OS.

  • 1.  help me ignore log

    Posted 09-16-2014 00:34

    Please help me turn off (or ignore) log when turn on / turn off laser fpc card

     

    regress@mate> exit

    % vty fpc11


    NPC platform (1067Mhz MPC 8548 processor, 2048MB memory, 512KB flash)

    NPC11(mate vty)# test cfp 1 laser on

    NPC11(mate vty)# [Sep 16 07:04:59.682 LOG: Info] cfp-11/0/0: current general ctrl/status[0xa010] => 0x200e
    [Sep 16 07:04:59.682 LOG: Info] cfp-11/0/0: new setting general ctrl/status[0xa010] => 0xe
    [Sep 16 07:05:00.029 LOG: Info] cmic_plat_dfe_coarse_tuning_stop: CMIC(11/0) stop DFE tuning for et-11/0/0
    [Sep 16 07:05:00.029 LOG: Info] cmic_plat_dfe_coarse_tuning_start: CMIC(11/0) start DFE tuning for et-11/0/0
    [Sep 16 07:05:01.022 LOG: Info] cmic_phy_dfe_tuning_state: et-11/0/0 - DFE coarse/fine tuning completes; enabling DFE adaptive tuning.
    [Sep 16 07:05:01.023 LOG: Info] XMCHIP(0): XXLCE0: Port Alarms: Cleared Ethernet MAC Remote Fault Delta Event for Port 0 (et-11/0/0)

    NPC11(mate vty)#

    Thanks alot



  • 2.  RE: help me ignore log

     
    Posted 09-26-2014 05:37

    Hi,

     

    set syslog disable

    test cfp 1 laser on

    set syslog enable

     

    Regards,

    Krasi



  • 3.  RE: help me ignore log

    Posted 11-25-2014 01:38

    Hi,

     

    As per the "KB29218" sub-second hold down timer might not work. Default timer on interface is "0". change the value to 1 sec and check the status.

     

    KB url for reference.

     

    http://kb.juniper.net/InfoCenter/index?page=content&id=KB29218&actp=search&viewlocale=en_US&searchid=1374993432533