Please help me turn off (or ignore) log when turn on / turn off laser fpc card
regress@mate> exit
% vty fpc11
NPC platform (1067Mhz MPC 8548 processor, 2048MB memory, 512KB flash)
NPC11(mate vty)# test cfp 1 laser on
NPC11(mate vty)# [Sep 16 07:04:59.682 LOG: Info] cfp-11/0/0: current general ctrl/status[0xa010] => 0x200e
[Sep 16 07:04:59.682 LOG: Info] cfp-11/0/0: new setting general ctrl/status[0xa010] => 0xe
[Sep 16 07:05:00.029 LOG: Info] cmic_plat_dfe_coarse_tuning_stop: CMIC(11/0) stop DFE tuning for et-11/0/0
[Sep 16 07:05:00.029 LOG: Info] cmic_plat_dfe_coarse_tuning_start: CMIC(11/0) start DFE tuning for et-11/0/0
[Sep 16 07:05:01.022 LOG: Info] cmic_phy_dfe_tuning_state: et-11/0/0 - DFE coarse/fine tuning completes; enabling DFE adaptive tuning.
[Sep 16 07:05:01.023 LOG: Info] XMCHIP(0): XXLCE0: Port Alarms: Cleared Ethernet MAC Remote Fault Delta Event for Port 0 (et-11/0/0)
NPC11(mate vty)#
Thanks alot