Junos
Reply
Visitor
tiamoremeral
Posts: 7
Registered: ‎10-11-2009
0

logging synchronous commad!!! Help me!!!

I have a question, that is "Which command in Junos that equals to "logging synchronous" in Cisco Router".

 

Thanks all. 

Distinguished Expert
mikep
Posts: 483
Registered: ‎06-30-2009

Re: logging synchronous commad!!! Help me!!!

Hi,

 

just remove "user *" under "system  syslog".

 

lab@Demo-081-135-EX8208# show system syslog
user * {
    any emergency;
}
file messages {
    any notice;
    authorization info;
}
file interactive-commands {
    interactive-commands any;
}

[edit]
lab@Demo-081-135-EX8208# delete system syslog user *

 

Do not forget to commit.

 

If you are using traceoptions (like Cisco debug) then you can press Esc-Q to disable output to your terminal.

 

Kind Regards

Michael Pergament

 

If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.

 

Distinguished Expert
mikep
Posts: 483
Registered: ‎06-30-2009
0

Re: logging synchronous commad!!! Help me!!!

Hi,

 

I need to add that it is not really identical to Cisco's sync command. As far as I understand Cisco sync it is just postpone output to console if user is typing a command. My previous post just disable the putput to console completely. I am not sure that there is an 100% analog to Cisco's sync command in Junos.

 

Kind Regards

Michael Pergament

Visitor
tiamoremeral
Posts: 7
Registered: ‎10-11-2009
0

Re: logging synchronous commad!!! Help me!!!

[ Edited ]

Thank mikep for replying, and so sorry for my replying lately, I did the same as your guide but did not solve my problem...

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.