Hi
I try to recovery password j2350 and i can, i try to follow step by step the procedure but something happend, i attach the logs for the activity, thanks
Trying to boot from Primary Compact Flash ... oles: serial port
BIOS drive C: is disk0
BIOS 639kB/1047360kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(builder@lanath.juniper.net, Tue Oct 6 19:54:46 UTC 2009)
Loading /boot/defaults/loader.conf
/kernel text=0x7299f8 data=0x41bdc+0x7a2b8 syms=[0x4+0x7d9c0+0x4+0xae2b0]
/boot/modules/umodem.ko text=0x1a7c data=0x184
loading required module 'ucom'
/boot/modules/ucom.ko text=0x1aa0 data=0xe0+0x4
/boot/modules/if_yk.ko text=0x1ea64 data=0x1348+0x20 |
loading required module 'libmbpool'
/boot/modules/libmbpool.ko text=0xd74 data=0x104
/boot/modules/jmdx.ko text=0x90e4 data=0x29c+0x2c
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel] in 1 second...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -s
platform_early_bootinit: J Series Early Boot Initialization
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2009, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 9.6R2.11 #0: 2009-10-06 20:20:10 UTC
builder@lanath.juniper.net:/volume/build/junos/9.6/release/9.6R2.11/obj-i386/bsd/sys/compile/JSR
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 2.50GHz (2500.10-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNTX-ID,<b14>>
real memory = 1073545216 (1023 MB)
avail memory = 587591680 (560 MB)
Initializing JSR platform properties ..
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 12 Entries> on motherboard
pci0: <PCI bus> on pcib0
pci0: <display> at device 2.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 3.0 on pci0
pci2: <PCI bus> on pcib1
pci2: <network, ethernet> at device 1.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc800-0xc81f irq 5 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xcc00-0xcc1f irq 5 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd000-0xd01f irq 5 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd400-0xd41f irq 5 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib2
ich0: <Intel 82562ET (ICH5/ICH5R) Pro/100 VE Ethernet> port 0xac00-0xac3f mem 0xfe4ff000-0xfe4fffff irq 5 at device 8.0 on pci1
fxp0 on ich0
fxp1 on ich0
pci1: <encrypt/decrypt, entertainment crypto> at device 15.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x400-0x41f irq 5 at device 31.3 on pci0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A, console
sio1: configured irq 5 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio2: configured irq 3 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio2 at port 0x2f8-0x2ff irq 3 on isa0
sio2: type 16550A
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: port may not be enabled
Initializing product: 32 ..
fxp0: detached
fxp1: detached
Timecounter "TSC" frequency 2500101244 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
j23x0_gpio_sci_handle: spurious removable-flash insertion/removal event
ad0: Device does not support APM
ad0: 495MB <512MB CKS YUAN1026> at ata0-master UDMA66
if_pfe_open: listener socket opened, listening on ...
Trying to create bootdev, rootpartition ad0s1a
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
Attaching /cf/packages/junos via /dev/mdctl...
Mounted junos package on /dev/md0...
Booting single-user
** /dev/ad0s1a
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
359 files, 311924 used, 130011 free (75 frags, 16242 blocks, 0.0% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
** /dev/bo0s1e
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
8 files, 11 used, 49212 free (12 frags, 6150 blocks, 0.0% fragmentation)
***** FILE SYSTEM MARKED CLEAN *****
System watchdog timer disabled
Enter full pathname of shell or 'recovery' for root password recovery or RETURN for /bin/sh: recovery
Skipping disk checks ...
Verified junos signed by PackageProduction_9_6_0
Verified jboot signed by PackageProduction_9_6_0
Loading configuration ...
mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons: usbd.
Doing initial network setup:.
Initial interface configuration:
rts_ifl_mput_channel_tlvs svcs_drv_apis = NULL
rts_ifl_mput_channel_tlvs svcs_drv_apis = NULL
additional daemons: eventd.
savecore: /dev/bo0s1b: No such file or directory
savecore: Reboot reason(s): 0x8: power-button hard power off
savecore: no dumps found
kern.module_pathng options:
: L/boot//kernel;/booot/modules -> /aboot//kernel;/bodiot/modules;/modunles
grat_arp_dgelay=${grat_arp_ delay}: net.linkt.ether.inet.grath_arp_delay: 0 ->e 0
kld netpfe m edia: ifpfem_briISDN BRI Media Layer; Attaching to media services layer
ifpfem_ds0Loading the DS0 Media Layer; Attaching to media services layer
ifpfem_ds1e1Loading the DS1/E1 Media Layer; Attaching to media services layer
ifpfem_ds3e3Loading the DS3/E3 Media Layer; Attaching to media services layer
erd netpfe drv: ifpfed_atm ifpfed_controll
ifpfed_dialerLoading the DIALER driver
ifpfed_ds0Loading DS0 driver
ifpfed_ds1e1Loading E1/T1/J1 driver
ifpfed_ds3e3Loading the NETPFE DS3 module
ifpfed_eia530 ifpfed_ethLoading the NETPFE ethernet module
ifpfed_irb ifpfed_isdnLoading the ISDN driver
ifpfed_ism Loading the ISM driver
ifpfed_lt ifpfed_ml_cmnLoading common multilink module.
ifpfed_ml_haLoading the SONET apsg module
ifpfed_modemL ifpfed_ppeeroading the NETPFE picpeer module
ifpfed_pppoeLoading the NETPFE PPPoE module
ifpfed_stLoading the IPSec driver
ifpfed_svcsLoading the netpfe services driver
ifpfed_vp ifpfed_vtkld platform: fileassoc if_emem0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xbc00-0xbc1f mem 0xfe5e0000-0xfe5fffff,0xfe5d0000-0xfe5dffff irq 5 at device 1.0 on pci2
em0: The EEPROM Checksum Is Not Valid
em0: Unable to initialize the hardware
device_attach: em0 attach returned 5
ifpfem_xdslLoading the XDSL Media Layer; Attaching to media services layer
ixp j_ifpfeLoading the J-series platform NETPFE module
Loading Link Services PICs module.
kern.module_path: /boot//kernel;/boot/modules;/modules -> /boot//kerneLl;/boot/modules;o/modules;/moduleas/peertype
kld dpeertype: peertyepe_fwdd peertyped_pfpc peertype_s lavereR ipsec kld rtl kTldChannel module
rtfc kld.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.i386 initialization: microcode kld.
Lock Manager
RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com
Copyright (c) 1992-2006 Birdstep Technology, Inc. All Rights Reserved.
Unix Domain sockets Lock manager
Lock manager 'lockmgr' started successfully.
rm: /var/pdb: Read-only file system
Profile database initialized
Local package initialization:.
starting local daemons:.
kern.securelevel: -1 -> 1
Creating UTM MFS partition...
UTM MFS partition created
cp: /etc/namedb/named.conf.def: No such file or directory
Wed Apr 28 04:44:02 UTC 2010
LAB-1 (ttyd0)
login: