Hi,
I used the following config on Juniper MX 240 running JunOS 12.3R6.6:
show firewall family inet prefix-action 100m-per-source-24
policer 100m;
count;
subnet-prefix-length 24;
destination-prefix-length 32;
show firewall policer 100m
if-exceeding {
bandwidth-limit 100m;
burst-size-limit 1m;
}
then discard;
show firewall family inet filter regulator term prefix-action
from {
destination-address {
10.0.0.0/24;
}
}
then {
accept;
prefix-action 100m-per-source-24;
}
show interfaces ae0 unit 199
vlan-id 199;
family inet {
filter {
output regulator;
}
address 10.0.0.1/24;
}
The config is commited but I cannot find any policers, the bandwidth limitation is also not working:
show firewall prefix-action-stats filter regulator prefix-action 100m-per-source-24
Filter: regulator
Is that a Junos Bug or what is wrong?
Greetings,
Freemind