Junos OS

Hi,

i try to upgrade 10.0 junos to junos 10.2 but there is problem to upgrade. i have the space as;

node0:
--------------------------------------------------------------------------
Routing Engine status:
    Temperature                 41 degrees C / 105 degrees F
    CPU temperature             38 degrees C / 100 degrees F
    Total memory              1024 MB Max   625 MB used ( 61 percent)
      Control plane memory     568 MB Max   352 MB used ( 62 percent)
      Data plane memory        456 MB Max   274 MB used ( 60 percent)
    CPU utilization:
      User                       4 percent
      Background                 0 percent
      Kernel                     3 percent
      Interrupt                  0 percent
      Idle                      93 percent
    Model                          RE-SRX240-HM
    Serial ID                      AABP1873
    Start time                     2010-11-14 15:51:03 UTC
    Uptime                         4 days, 1 hour, 36 minutes, 8 seconds
    Last reboot reason             0x20:power-button soft power off
    Load averages:                 1 minute   5 minute  15 minute
                                       0.12       0.13       0.14

node1:
--------------------------------------------------------------------------
Routing Engine status:
    Temperature                 40 degrees C / 104 degrees F
    CPU temperature             37 degrees C / 98 degrees F
    Total memory              1024 MB Max   553 MB used ( 54 percent)
      Control plane memory     568 MB Max   278 MB used ( 49 percent)
      Data plane memory        456 MB Max   274 MB used ( 60 percent)
    CPU utilization:
      User                       4 percent
      Background                 0 percent
      Kernel                     1 percent
      Interrupt                  0 percent
      Idle                      95 percent
    Model                          RE-SRX240-HM
    Serial ID                      AABT3904
    Start time                     2010-11-14 15:51:03 UTC
    Uptime                         4 days, 1 hour, 36 minutes, 2 seconds
    Last reboot reason             0x20:power-button soft power off
    Load averages:                 1 minute   5 minute  15 minute
                                       0.07       0.06       0.02

and storage is as:

node0:
--------------------------------------------------------------------------
Filesystem              Size       Used      Avail  Capacity   Mounted on
/dev/da0s1a             293M       179M        91M       66%  /
devfs                   1.0K       1.0K         0B      100%  /dev
devfs                   1.0K       1.0K         0B      100%  /dev/
/dev/md0                495M       495M         0B      100%  /junos
/cf                     293M       179M        91M       66%  /junos/cf
devfs                   1.0K       1.0K         0B      100%  /junos/dev/
procfs                  4.0K       4.0K         0B      100%  /proc
/dev/bo0s3e              24M       136K        22M        1%  /config
/dev/bo0s3f             342M       6.2M       309M        2%  /cf/var
/dev/md1                168M        14M       140M        9%  /mfs
/cf/var/jail            342M       6.2M       309M        2%  /jail/var
/cf/var/log             342M       6.2M       309M        2%  /jail/var/log
devfs                   1.0K       1.0K         0B      100%  /jail/dev
/dev/md2                 39M       4.0K        36M        0%  /mfs/var/run/utm
/dev/md3                1.8M       4.0K       1.7M        0%  /jail/mfs

node1:
--------------------------------------------------------------------------
Filesystem              Size       Used      Avail  Capacity   Mounted on
/dev/da0s1a             293M       179M        91M       66%  /
devfs                   1.0K       1.0K         0B      100%  /dev
devfs                   1.0K       1.0K         0B      100%  /dev/
/dev/md0                495M       495M         0B      100%  /junos
/cf                     293M       179M        91M       66%  /junos/cf
devfs                   1.0K       1.0K         0B      100%  /junos/dev/
procfs                  4.0K       4.0K         0B      100%  /proc
/dev/bo0s3e              24M       134K        22M        1%  /config
/dev/bo0s3f             342M       5.9M       309M        2%  /cf/var
/dev/md1                168M        14M       141M        9%  /mfs
/cf/var/jail            342M       5.9M       309M        2%  /jail/var
/cf/var/log             342M       5.9M       309M        2%  /jail/var/log
devfs                   1.0K       1.0K         0B      100%  /jail/dev
/dev/md2                 39M       4.0K        36M        0%  /mfs/var/run/utm
/dev/md3                1.8M       4.0K       1.7M        0%  /jail/mfs

what is the problem to upgrade? as storage is also is available, plz guide.........

Hi Shyan ,

Please do the below command then try again :

> request system storage cleanup

When trying use the below command

>request system software add ftp://username : password@ x.x.x.x (Ip address of FTP)/filename (in .tgz format)  no-copy unlink

Make sure to have the options : no-copy  & unlink   at the above command , If you  still have the issue after that  please paste all the messages appearing for you till the upgrade fails

**************  Click on the button saying " Accept  as Solution"  if  My Post solved your problem  **************

Hi SSHSSH,

Thanks for your efforts, i see using from USB.

Hi SSHSSH,

when i try to  load juos10.2 in srx 100  from USB, then i get , can't load '/kernel'  and can't load '/kernerl.old.

then i follow the link http://kb.juniper.net/InfoCenter/index?page=content&id=KB12790&actp=search&viewlocale=en_US&searchid=1290917440943. again i get the same problem, now how  to load or recover the pre installed os.

please follw the complete loading message

loader> install --format file:///junos-srxsme-10.2R3.10-domestic.tgz
invalid URL
loader> install file:///junos-srxsme-10.2R3.10-domestic.tgz
/kernel data=0x9120e4+0xc6d10 syms=[0x4+0x74800+0x4+0xa4eb2]
Kernel entry at 0x801000d8 ...
getbootinfo: magic 0x0 md 0x8176a000 memsize 0x0
getbootinfo: boothowto 0x0 kernend 0x81800000 memsize 1024MB i2cid 0x531 kernelname /kernel

Platform Starting
init regular console
Initializing octeon watchdog
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
getmemsize: msgbufp[size=32768] = 0x8000cfe4
Copyright (c) 1996-2010, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
JUNOS 10.0R3.10 #0: 2010-04-16 08:47:35 UTC
    builder@ormonth.juniper.net:/volume/build/junos/10.0/release/10.2R3.10/obj-octeon/bsd/sys/compile/JS
RXNLE
JUNOS 10.0R3.10 #0: 2010-04-16 08:47:35 UTC
    builder@ormonth.juniper.net:/volume/build/junos/10.0/release/10.2R3.10/obj-octeon/bsd/sys/compile/JS
RXNLE
real memory  = 1073741824 (1024MB)
avail memory = 519200768 (495MB)
cpuid: 0, btlb_cpumap:0xffffffff
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Initializing watchdog interupt

Loading RT Fifo module.....
Loaded RT Fifo module
pmap_helper loaded (interface version 6, syscall 210)
cpu0 on motherboard
: CAVIUM's Octeon CPU Rev. 0.1 with no FPU implemented
        L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way.
        L2 Cache: Size 128kb, ? way
obio0 on motherboard
uart0: <Octeon-16550 channel 0> on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
dwc0: <Synopsis DWC OTG Controller Driver> on obio0
usb0: DWC OTG Controller
Using DMA mode
Init: Port Power? op_state=1
Init: Power Port (0)
usb0: <USB Bus for DWC OTG Controller> on dwc0
usb0: USB revision 2.0
uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2
uhub1: single transaction translator
uhub1: 2 ports with 1 removable, self powered
umass0: STMicroelectronics ST72682  High Speed Mode, rev 2.00/2.10, addr 3
umass1: SanDisk Cruzer Blade, rev 2.00/2.00, addr 4
pcib0: <Cavium on-chip PCI bridge> on obio0
Disabling Octeon big bar support
PCI Status: PCI 32-bit: 0xc041b
pcib0: Initialized controller
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 2.0 (no driver attached)
pci0: <serial bus, USB> at device 2.1 (no driver attached)
pci0: <serial bus, USB> at device 2.2 (no driver attached)
cpld0 on obio0
gblmem0 on obio0
octpkt0: <Octeon RGMII> on obio0
cfi0: <AMD/Fujitsu - 4MB> on obio0
platform_cookie_read not implemented
Timecounter "mips" frequency 500000000 Hz quality 0
Timecounters tick every 1.000 msec
md0: Preloaded image </isofs-install-srxsme> 12019712 bytes at 0x80bf24b0
Loading the NETPFE ethernet module
Loading E1/T1/J1 driver
Loading the DS1/E1 Media Layer; Attaching to media services layer
Loading common multilink module.
Loading the NETPFE PPPoE module
Loading the netpfe services driver
Loading the XDSL Media Layer; Attaching to media services layer
Loading the IPSec driver
 Loading the PTM driver

Loading the DIALER driver
Loading Link Services PICs module.
IPsec: Initialized Security Association Processing.
SMP: AP CPU #1 Launched!
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <SanDisk Cruzer Blade 8.02> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: 1907MB (3907583 512 byte sectors: 255H 63S/T 243C)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
if_pfe_open: listener socket opened, listening on ...
Trying to mount root from cd9660:/dev/md0
WARNING: preposterous time in file system
WARNING: clock 8547 days greater than file system time
tty: not found
Installing disk1:/junos-srxsme-10.2R3.10-domestic.tgz
mount_msdosfs: /dev/da1s1: No such file or directory
ERROR: Execution failed for command mount
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 0 done

syncing disks... All buffers synced.
Uptime: 11s
Rebooting...
cpu_reset: Stopping other CPUs


U-Boot 1.1.6-JNPR-1.7 (Build time: May  4 2010 - 06:59:58)

SRX_100_HIGHMEM board revision major:0, minor:0, serial #: AT4010AF0696
OCTEON CN5020-SCP pass 1.1, Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
DRAM:  1024 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash:  4 MB
USB:   scanning bus for devices... 4 USB Device(s) found
       scanning bus for storage devices... 2 Storage Device(s) found
Clearing DRAM........ done
BIST check passed.
Boot Media: nand-flash usb
Net:   pic init done (err = 0)octeth0
POST Passed
Press SPACE to abort autoboot in 1 seconds
ELF file is 32 bit
Loading .text @ 0x8f000078 (246092 bytes)
Loading .rodata @ 0x8f03c1c4 (13940 bytes)
Loading .rodata.str1.4 @ 0x8f03f838 (16580 bytes)
Loading set_Xcommand_set @ 0x8f0438fc (104 bytes)
Loading .rodata.cst4 @ 0x8f043964 (20 bytes)
Loading .data @ 0x8f044000 (5620 bytes)
Loading .data.rel.ro @ 0x8f0455f4 (120 bytes)
Loading .data.rel @ 0x8f04566c (136 bytes)
Clearing .bss @ 0x8f0456f8 (11912 bytes)
## Starting application at 0x8f000078 ...
Consoles: U-Boot console
Found compatible API, ver. 1.7

FreeBSD/MIPS U-Boot bootstrap loader, Revision 1.7
(builder@shoth.juniper.net, Tue May  4 07:15:51 UTC 2010)
Memory: 1024MB
[1]Booting from nand-flash slice 1
Un-Protected 1 sectors
writing to flash...
Protected 1 sectors
/
can't load '/kernel'
can't load '/kernel.old'
Press Enter to stop auto bootsequencing and to enter loader prompt.

Have you followed the steps completely  :  Formatted the Flash , didnot create any folders on the flash ?

If  you did the above & still it didnot work , I think you need to open a case with JTAC

Hi SSHSSH,

Thanks for your,efforts.

I have solved this case by first the box is  booted from USB, copied from another running box, and then second i take snapshot to internal media.