Junos OS

last person joined: 21 hours ago 

Ask questions and share experiences about Junos OS.
  • 1.  question for snmp alarms synchronization

    Posted 04-28-2014 19:56

    Hi Expert,

     

         As far as I know, if I want to query active alarms in Junos based juniper devices, I can use following command to acheive this just for system and chassis alarms:

    nat@NATLIS_MX240_1> show system alarms

    nat@NATLIS_MX240_1> show chassis alarms

     

        Regarding to this, I was wondering if NMS wants to synchronize all active alarms with managed Juniper devices, can it do alarm upload from one place that stores all active alarms centrally? In other words, is there a alarm table in juniper mibs that all active alarms will be located in?



  • 2.  RE: question for snmp alarms synchronization
    Best Answer

    Posted 04-29-2014 04:01

    Hello,

    There is Alarm MIB in JUNOS but it does not store alarm descriptions/text, only number of yellow/red alarms

    http://www.juniper.net/techpubs/en_US/junos13.3/topics/topic-map/mib-alarm-interpreting.html

    HTH

    Thanks
    Alex