Hi Group,
On one of our M120 router in version 8.4R3.3 I see a strange behavior.
When I load a new configuration, with the command "load override terminal", the router give me an error even if there is no problem in my configuration. If I test to load my configuration on an other router (the same model) it works. This is what I see:
toto@MY_ROUTER# load override terminal
...
load complete
[edit]
toto@MY_ROUTER# commit check
/var/run/db/private/juniper-4917.patch:818:(0) syntax error
[edit]
'prefix-list external-project { ... }'
syntax error
To give you an other example, always with the same router, if I load the "factory-default" configuration this is the error:
[edit]
toto@MY_ROUTER# load factory-default
warning: activating factory configuration
[edit]
toto@MY_ROUTER# ...ication plain-text-password
New password:
Retype new password:
[edit]
toto@MY_ROUTER# show
## Last changed: 2008-05-02 16:16:17 CEST
system {
root-authentication {
encrypted-password "$1$pkIpJBkH$dzGoRuNXMX/g30jdlsfs00"; ## SECRET-DATA
}
syslog {
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
}
[edit]
toto@MY_ROUTER# commit synchronize
[edit system login]
'user'
patch removes statement that is not empty
Have you already seen this problem? On my side I have already seen this issue with a T640 in version 8.5V2.10.
Do you think there is a problem with the database?
Thanks for your help and your tricks.
Regards,
Samuel