Management
Reply
Contributor
angelnegro27
Posts: 54
Registered: ‎03-19-2010
0
Accepted Solution

Consuming CPU performanc​e send to NSM

Consuming CPU performanc​e send to NSM 

 

i have a question.

 

i try to implement SRX with NSM. I need to send from the SRX to NSM consuming CPU performance and consuming MEMMORY, that is possible?, what configuration i need to do?.

 

thanks everyone.

Distinguished Expert
firewall72
Posts: 811
Registered: ‎05-04-2008
0

Re: Consuming CPU performanc​e send to NSM

Hi,

 

I don't think the "View Statistics" option has been added to the NSM/SRX yet.  I typically use this feature with ScreenOS devices to pull CPU.  However, you can use SNMP to accomplish this.

 

http://forums.juniper.net/t5/SRX-Services-Gateway/MIBs-for-Monitoring-CPU-and-Memory-on-SRX240/m-p/3...

 

-John

John Judge
JNCIS-SEC, JNCIS-ENT, JNCIA-JUNOS, JNSS-Firewall

If this solves your problem, please mark this post as "Accepted Solution". Kudos are appreciated.
Contributor
cyke
Posts: 56
Registered: ‎06-02-2008
0

Re: Consuming CPU performanc​e send to NSM

i usually use 3rd party software to do that.  MRTG(free) or PRTG(not free) will produce nice graphs for you. you can also use jweb if it works for you.

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.