Security

last person joined: yesterday 

Ask questions and share experiences with Juniper Connected Security. Discuss Advanced Threat Protection, SecIntel, Secure Analytics, Secure Connect, Security Director, and all things related to Juniper security technologies.

  • 1.  Full-Mesh VPN with OSPF on NSM

    Posted 02-26-2010 10:34

    Hi,

     

    I am trying to follow this document -> http://forums.juniper.net/jnet/attachments/jnet/Firewalls/2949/1/Full_Mesh_VPN_w_OSPF_ver_1_0.pdf to implement Full-Mesh VPN with OSPF, but using an NSMExpress device 2009.1r1.

     

    My current stumbling block is how to apply an ip address to the tunnel interface using the VPN Manager. When I apply the address directly there is an 'Override' warning.

     

    Thanks in advance

     

    John



  • 2.  RE: Full-Mesh VPN with OSPF on NSM
    Best Answer

    Posted 03-03-2010 16:40

    I believe your getting this because the VPN manager in NSM automaticly creates an unumbered interface if you choose OSPF as the routing.

     

    I have over 120 sites managed through VPN Manager and I have overrides all over the place for specific things, I would not worry about the override if its something your really need.

     

    Magraw



  • 3.  RE: Full-Mesh VPN with OSPF on NSM

    Posted 03-03-2010 17:38

    Thanks Magraw; I guess I needed to hear someone else say it.