When attempting to configure Track-IP via the Monitoring tab at the interface edit level, the monitoring tab is missing on all interfaces except for ethernet0/0. The option is available and can be configured via both the WebUI and the command line for both interface ethernet0/1 and bgroup0 (containing ethernet0/2-ethernet0/6).
We are currently running the following versions:
NSMXpress - 2010.3
SSG-5 - 6.2r5
This is something I had seen in the past when dealing with NSM 2009.1 while managing a firewall in an NSRP cluster, but not a single firewall like this.
Any assistance would be greatly appreciated.
