HI All,
I recenlty bought a second hand MX 480. To have a clean start i used the commands request system zeroize & load factory-default to put the system on factory configuration. Now i want to connect to a web GUI. Is it not possible to connect to web GUI without a J-Web for mx 480? i cant find a J-Web for mx480 in the Juniper website for some reason.Please tell me if i am doing something wrong. Any help would be appreciated. This is how my 'show configuration' displays now -
version 10.0R3.10;
system {
root-authentication {
encrypted-password "$1$LNtXGXr9$4gDYIdp84Dc30ivTXYa1v/"; ## SECRET-DATA
}
services {
web-management {
http;
}
}
syslog {
user * {
any emergency;
}
file messages {
any notice;
authorization info;
}
file interactive-commands {
interactive-commands any;
}
}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 192.168.1.1/24;
}
}
}
fxp1 {
unit 0 {
family inet {
address 192.168.1.8/24;
}
}
}
}
Just letting everyone know that i am really new to Juniper and can be wrong in my steps for setting up a web GUI. Please advice me the best way to achieve this.
Cheers,
RV