Management
Reply
Visitor
NSMXpress
Posts: 4
Registered: ‎08-24-2008
0
Accepted Solution

NSMXpress Password for Maintenance

Hi,

After rebooting manually NSMXpress server, i have the sentence on the console line interface : please perform a check disk and enter the password for maintenance.

Is anyone know this password as i am unable to find it in any documentation.

I thank you very much for your help

Best regards,

pierrick,
Recognized Expert Recognized Expert
Recognized Expert
CB
Posts: 159
Registered: ‎05-09-2008
0

Re: NSMXpress Password for Maintenance

Hi Pierrick,

 

shouldn't this password be either the password you entered for the admin user, or alternatively try abc123.

 

Kind regards

 

Colin

If this worked for you please flag my post as an "Accepted Solution" so others can benefit.
Visitor
NSMXpress
Posts: 4
Registered: ‎08-24-2008
0

Re: NSMXpress Password for Maintenance

Hi Colin,

 

Thank you for your answer,

Unfortunately, I have tried to use the admin password and the default password abc123 but is not working...

 

Best regards,

 

Pierrick, 

 

Recognized Expert Recognized Expert
Recognized Expert
CB
Posts: 159
Registered: ‎05-09-2008
0

Re: NSMXpress Password for Maintenance

Hi Pierrick,

 

can you run through the following

 

http://kb.juniper.net/KB10036

 

this should resolve your issue. A powerdown without shutdown may cause some problems , the KB should resolve it without the need for the root / admin password.

 

Kind regards

 

Colin

If this worked for you please flag my post as an "Accepted Solution" so others can benefit.
Visitor
NSMXpress
Posts: 4
Registered: ‎08-24-2008
0

Re: NSMXpress Password for Maintenance

Thank you very much Colin for your help i tried your solution and it is working now,

 

best regards,

 

Pierrick

Recognized Expert Recognized Expert
Recognized Expert
CB
Posts: 159
Registered: ‎05-09-2008
0

Re: NSMXpress Password for Maintenance

Hi Pierrick,

 

glad you're back up and running.

Kind regards

Colin

If this worked for you please flag my post as an "Accepted Solution" so others can benefit.
Trusted Contributor
michael.saw
Posts: 1,048
Registered: ‎09-26-2011
0

Re: NSMXpress Password for Maintenance

Thanks for sharing!

Anyone succeeded in using password abc123?
Thanks!

Michael
JNCIA-JUNOS, JNCIS-ENT/SEC, JNCIP-ENT
(CCNA, ACMP, ACFE, CISE)
"http://www.thechampioncommunity.com/"
CONNECT EVERYTHING. EMPOWER EVERYONE.
Share & Learn. Knowledge is Power.

"If there's a will, there's a way!"
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.