Thank you so much for your kind response or help but problem is I unable to run following commands. I also many time tried (show system services web-management) but no effect.
I also restarted web service but problem is same or see response below after run the delete commands.
root@COREFWV-02-01> set ?
Possible completions:
chassis Set chassis properties
cli Set CLI properties
date Set system date and time
{primary:node0}
root@COREFWV-02-01> set
syntax error, expecting <command>.
root@COREFWV-02-01> delete system services web-management
^unknown command.
root@COREFWV-02-01> delete system services web-management
error: unknown command: delete
{primary:node0}
root@COREFWV-02-01> delete system services web-management
^unknown command.
{primary:node0}
Also when I am running specified commands tab is not working..
Web management gatekeeper process started, pid 53936
{primary:node0}
root@COREFWV-02-01> show system storage
node0:
--------------------------------------------------------------------------
Filesystem Size Used Avail Capacity Mounted on
/dev/ad0s1a 865M 416M 380M 52% /
devfs 1.0K 1.0K 0B 100% /dev
/dev/md0 515M 515M 0B 100% /junos
/cf 865M 416M 380M 52% /junos/cf
devfs 1.0K 1.0K 0B 100% /junos/dev/
procfs 4.0K 4.0K 0B 100% /proc
/dev/ad0s1e 96M 794K 88M 1% /config
/dev/ad2s1f 12G 742M 10G 7% /var
/dev/md1 998M 1.0M 917M 0% /mfs
/var/jail 12G 742M 10G 7% /jail/var
/var/log 12G 742M 10G 7% /jail/var/log
devfs 1.0K 1.0K 0B 100% /jail/dev
node1:
--------------------------------------------------------------------------
Filesystem Size Used Avail Capacity Mounted on
/dev/ad0s1a 865M 415M 381M 52% /
devfs 1.0K 1.0K 0B 100% /dev
/dev/md0 515M 515M 0B 100% /junos
/cf 865M 415M 381M 52% /junos/cf
devfs 1.0K 1.0K 0B 100% /junos/dev/
procfs 4.0K 4.0K 0B 100% /proc
/dev/ad0s1e 96M 452K 88M 0% /config
/dev/ad2s1f 12G 1.3G 9.6G 12% /var
/dev/md1 998M 982K 917M 0% /mfs
/var/jail 12G 1.3G 9.6G 12% /jail/var
/var/log 12G 1.3G 9.6G 12% /jail/var/log
devfs 1.0K 1.0K 0B 100% /jail/dev
{primary:node0}
root@COREFWV-02-01> show cpu
^
syntax error, expecting <command>.
root@COREFWV-02-01> show cpu
Looking forward for your kind response.
Thanks