Management
Reply
Contributor
stianm
Posts: 23
Registered: ‎09-17-2008
0
Accepted Solution

Updating multiple J-Series devices with NSM 2008.1

Hi.

 

I have tried to find some information regarding updating of multiple J-Series devices running Junos-ES in NSM, but have come up short.

 

 I am looking for numbers regarding the amount of routers i can select to get updated with, say a policy-change(or any change for that matter)simultaniously. If i have 200 routers, can i select them all and let NSM do its work ?

 

Does it create a list of seleceted devices and go throught one and one, or does it "broadcast" updates to all devices simultaniously.

 

Thanks

 

stianm

Super Contributor
benjaminc
Posts: 181
Registered: ‎11-07-2007
0

Re: Updating multiple J-Series devices with NSM 2008.1

Hi,

 

IIRC NSM will udpate a max of 8 devices at a time and then begin on the next ones when they are finished, I can't find the docs on this right now, but I am sure that we will not open connections to all the devices at once.

 

Maybe somebody else internal will answer!

 

Laters

 

Ben

Contributor
stianm
Posts: 23
Registered: ‎09-17-2008
0

Re: Updating multiple J-Series devices with NSM 2008.1

Hi.

 

Thanks for the reply. I agree having NSM opening connections to a whole fleet of devices simultaniously will most likely end in disaster. But 8 at once i can live with :smileyhappy:

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.