Packet-Optical Technologies
Showing results for 
Search instead for 
Do you mean 

In Metro rings, typically most of the traffic goes from the nodes on the ring to a head end.

 

When the traffic on the ring is low (compared to the size of the links) it is obvious that the “most-efficient” solution is to build a ring of point-to-point connections between the nodes. When the traffic is high, it is equally obvious that the “most-efficient” solution is to connect every node directly to the head-end aggregation router(s) in a star or double-star "hub-and-spoke" formation.

 

Where it gets interesting is when you are some place in between and when there is at least some local traffic between the nodes on the ring, as well as the main traffic direct to the head-end(s). How do you mix point-to-point connections along the ring with direct connections to the head-end in the most efficient way?

Read more...

PIC a Winner – 100G DWDM for the Metro

by Juniper Employee on ‎05-22-2015 03:15 PM

In 2013 Juniper made good things happen with the introduction of the 2x100G DWDM PIC (P1-PTX-2-100G-WDM) for the PTX5000 and PTX3000. For the first time, Juniper customers did not have to sacrifice port density when choosing between 100G ‘grey’ client interfaces or ‘colored’ DWDM line interfaces.

 

The 2x100G DWDM PIC packs a punch – up to 2000km reach from the front panel of a router! No more clunky, expensive third-party external transponders. Yet for many applications, having the ability to shoot halfway across the continental US is overkill. Enter the 2x100G Metro DWDM PIC (PTX-2-100G-WDM-M)…

Read more...