07-20-2009 05:57 PM
We recently upgraded our SA4000 from 5.5R1 to 6.4R1. We have been experiencing negative behavior(s) with RDP after the upgrade:
1- Some users are no longer able to access their workstations via RDP either using the FQDN or IP address of their workstations. (Adding the workstation name to the Allowed Destination Server list will provide access.)
2- If a user is able to use RDP, they need to use the FQDN of their workstations to gain access.
3- If the FQDN of their workstations do not work, they need to enter their IP address of their workstations to gain access.
I opened a ticket with JTAC but was informed to I enter each workstation name into the Allowed Server list. With over 700 PC's, this is would not be a good idea. Also in version 5.5, my users were able to enter the just the short name and gain access to their workstations.
What has changed? Is version 6.4 not stable while using RDP? I had another tech advised me to install version 6.3R3 as he believed this was a stable version.
Has anyone else experienced this kind of issue?
07-24-2009 11:34 AM
there is an option to auto allow servers you can set this up in users -> roles -> your role name -> termnial services - > options
this will fix the first problem of allowing comptuers individually
the FQDN could be bec you moved to a new Domain? or some one messed with your setting on ur IVE?
Check under System - > Overview -> DNS Name resolution - > DNS Domains and make sure all your domains are listed here
also up top make sure it says settings for Entire cluster (if you are using a cluster of IVEs)
MAG 4610 (7.4) Lab
07-29-2009 09:07 AM