Routing
Showing results for 
Search instead for 
Do you mean 
Reply
Contributor
Posts: 46
Registered: ‎08-19-2011
0 Kudos

ACX PTP FDD AND TDD

ITU-T G.8265.1 FDD profile is supported on ACX series, so Frequesncy Sync is possible using PTP.

 

But niether ITU-T G.8275.1 nor ITU-T G.8275.2 TDD profiles are supported on ACX currently. So is there a way to configure ACX as PTP slave to sync time/phase.

 

PTP.JPG

Highlighted
Super Contributor
Posts: 68
Registered: ‎06-21-2017
0 Kudos

Re: ACX PTP FDD AND TDD

Hi,

To configure ACX  PTP slave clock:

 

  1. Configure the clock mode:
    [edit protocols ptp]
    user@host# set clock-mode (boundary | ordinary)
     
  2. Configure the slave clock.
    [edit protocols ptp]
    user@host# edit slave


Check the below link to see the options to configure under [edit protocols ptp slave]

https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/ptp-slave-clock.html



Regards,
Rahul

Please mark my solution as accepted if it helped.

Contributor
Posts: 46
Registered: ‎08-19-2011
0 Kudos

Re: ACX PTP FDD AND TDD

Hi Rahul,

 

Thanks for the contribution.

 

What you have given is FDD profile. I was reffering the TDD profiles.

 

 

Smartm.