Sorry for confusion.
I was comparing with Cisco where L3 lookup is performed in CEF table and for L2 lookup "adjacency table" is used.
Let me show you example from one of my cisco device to have better understanding.
xxxx#sh adjacency GigabitEthernet4/0/0 det
Protocol Interface Address
IP GigabitEthernet4/0/0 x.x.x.x(15)
5983 packets, 427061 bytes
epoch 2
sourced in sev-epoch 72
Encap length 14
00046D7D141A00270DCA23800800 <<< src-mac / dst-mac / ethertype
L2 destination address byte offset 0
L2 destination address byte length 6
Link-type after encap: ip
ARP
Regards
Mahesh