Hi
joses,
If we show on the local device and see CRC Errors in an interface increases continuously.
The line has good quality, can I confirm the far end has a problem.
As I show interface extensive, I see CRC Errors appear in both Input and Output direction:
Input errors:
Errors: 429472865, Drops: 0, Framing errors: 429472865, Runts: 0, Policed discards: 0, L3 incompletes: 0, L2 channel errors: 0,
L2 mismatch timeouts: 0, FIFO errors: 0, Resource errors: 0
Output errors:
Carrier transitions: 949, Errors: 0, Drops: 0, Collisions: 0, Aged packets: 0, FIFO errors: 0,
HS link CRC errors: 0, MTU errors: 0,
Resource errors: 0
CRC/Align errors 429472865 0
If CRC increases in Input direction --> check far end.
If CRC increases in Output direction --> check local.
Please help me clarify.
Thank you.
------------------------------
Harry
------------------------------
Original Message:
Sent: 07-20-2015 03:06
From: Sam Jose
Subject: CRC errors on interface
Hello ,
This error can be caused due to cable issue , far end system or PIC issue . Please check these and see if there is any fault .