Routing
Reply
Contributor
DaveS
Posts: 21
Registered: ‎06-12-2009
0
Accepted Solution

Cisco 2901 vs. J2320 Question,

Cisco 2901 vs. J2320 Question, 

 

I current have IDP 250’s on my edge attached to a Cisco 2801 which is on an end of life cycle. I was thinking on replacing that with a J2320 to take advantage of managing it with my NSM which I use for the IDP’s. I’m having trouble locating answers on the web site so I’ll ask them here.

 

Can the J2320 be managed by the NSM series 2?

 

Are the 10/100/1000 ports on the J2320 layer 3? I’m assuming they are.

 

Can those ports do dotq1 encapsulation? Similar to this config on the 2801.

 

interface GigabitEthernet0/1.1

 Encapsulation dot1Q 241

 IP address 192.168.20.1 255.255.255.252

 

Is the J2320 a reliable piece of hardware?

 

Thanks for any input.

Recognized Expert
JNPRdhanks
Posts: 310
Registered: ‎11-01-2010

Re: Cisco 2901 vs. J2320 Question,

The answer is yes to all of the above.

Doug Hanks
JNCIE-ENT #213, JNCIE-SP #875

Follow me on Twitter @douglashanksjr
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.