Routing
Reply
New User
Juni Mann
Posts: 3
Registered: ‎01-30-2012
0

EX 3200 vs EX 4200?

Hello, room.

 

I need a pair of EX to server as core switch to build a HAN (multi-line drops).

The EX needs to support VRRP.

 

The 3200 and 4200 seem to be right for this job (VRRP)

 

4200 is more expensive.

 

I want to go with EX 3200.

 

Please advise.

 

Thanks alot.

Distinguished Expert
firewall72
Posts: 825
Registered: ‎05-04-2008
0

Re: EX 3200 vs EX 4200?

Hi,

 

I would recommend reviewing the data sheets.  In my opinion, the most significant difference is the 4200 support Virtual Chassis.  If VC is not important now or in the future, the 3200's should do just fine.  Good luck.

John Judge
JNCIS-SEC, JNCIS-ENT,

If this solves your problem, please mark this post as "Accepted Solution". Kudos are appreciated.
Contributor
stuartb
Posts: 30
Registered: ‎11-20-2008
0

Re: EX 3200 vs EX 4200?

also the EX4200 supports full line rate on all ports, whereas the 3200 does not. (from memory).

Trusted Contributor
Ozark777
Posts: 114
Registered: ‎01-06-2010
0

Re: EX 3200 vs EX 4200?

With the 2 4200's in Virtual chassis (VC), you won't need VRRP.  

 

Also, the failover for a VC is much faster than VRRP (Higher Availability)

-------------------------------------------------------------------------------
Ben Boyd
Sr. Solutions Architect
Integration Partners (http://www.integrationpartners.com)
JNCIE-M, JNCIE-ENT, JNCIP-SEC, JNCIA-EX
Twitter - @ozark46
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.