Hi Colleagues,
I am having problems for CPU at 100% every 10 minutes on my EX4500 (VC) (12.3R12.4). When I check the processes I see the SFID consuming all the CPU. Also when i do a ping rapid count the CPU goes to 100% also when I check the processes extensive I see the SFID also consuming all CPU.
Someone has seen this same behavior on EX4500 VC?
Example System Process without Rapid Count Ping
PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND
11 root 1 171 52 0K 16K RUN 3532.7 53.81% idle
1314 root 2 44 -52 72460K 18568K select 1656.4 27.44% sfid
1316 root 1 105 0 70984K 17176K RUN 275.6H 4.69% pfem
1313 root 1 -9 0 67488K 8436K i2c_wt 251.7H 1.95% chassism
1341 root 1 98 0 28376K 7612K select 17.7H 0.98% mib2d
1342 root 1 4 0 57656K 17492K kqread 145.5H 0.34% rpd
16 root 1 -68 -187 0K 16K RUN 64.8H 0.00% mpfe_drv_taskq16: +
1348 root 1 97 0 16812K 6376K select 46.2H 0.00% ppmd
12 root 1 -20 -139 0K 16K WAIT 40.9H 0.00% swi7: clock
41 root 1 76 0 0K 16K sleep 32.2H 0.00% netdaemon
1340 root 1 96 0 23084K 12164K select 26.7H 0.00% snmpd
Example System Process doing a rapid count.
PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND
1314 root 2 44 -52 72460K 18568K ucond 1656.4 55.52% sfid
11367 root 1 132 0 7844K 3184K select 0:16 6.98% sshd
1316 root 1 8 0 70984K 17176K nanslp 275.6H 5.81% pfem
11568 manager 1 128 0 5304K 1924K RUN 0:08 4.00% ping
1313 root 1 4 0 67488K 8436K kqread 251.7H 3.71% chassism
1346 root 1 124 0 13404K 3432K RUN 104:28 2.88% rmopd
41 root 1 76 0 0K 16K sleep 32.2H 2.25% netdaemon
1341 root 1 115 0 28376K 7612K select 17.7H 1.27% mib2d
16 root 1 -68 -187 0K 16K WAIT 64.8H 1.12% mpfe_drv_taskq16: +