Configuing FBF on an SRX240 using static routes. I want to put the input filter on my reth1.71 because all traffic that goes through the Firewall will come from that interface. My issue was only TWC routing instance appeared in my routes not the XO instance. Not sure what I'm missing?
Set interfaces reth1.71 family inet filter input ISP-INPUT-FILTER
set firewall filter ISP-INPUT-FILTER term ROUTE-OVER-TWC from source-address 10.224.2.11
set firewall filter ISP-INPUT-FILTER term ROUTE-OVER-TWC then routing-instance routing-table-TWC
set routing-instances routing-table-TWC routing-options static route 0.0.0.0/0 next-hop 97.77.62.9
set routing-instances routing-table-TWC instance-type forwarding
set firewall filter ISP-INPUT-FILTER term ROUTE-OVER-XO from source-address 10.224.0.0/24
set firewall filter ISP-INPUT-FILTER term ROUTE-OVER-XO then routing-instance routing-table-XO
set routing-instances routing-table-XO routing-options static route 0.0.0.0/0 next-hop 216.1.170.253
set routing-instances routing-table-XO routing-options static route 0.0.0.0/0 qualified-next-hop 97.77.62.9 preference 100
set routing-instances routing-table-XO instance-type forwarding
set routing-options rib-groups FBF-GROUP import-rib inet.0
set routing-options rib-groups FBF-GROUP import-rib routing-table-XO.inet.0
set routing-options rib-groups FBF-GROUP import-rib routing-table-TWC.inet.0