Routing

last person joined: yesterday 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

  • 1.  FBF - Policy Based Routing

    Posted 01-23-2015 11:05

    Configuing FBF on an SRX240 using static routes. I want to put the input filter on my reth1.71 because all traffic that goes through the Firewall will come from that interface. My issue was only TWC routing instance appeared in my routes not the XO instance. Not sure what I'm missing?

     

    Set  interfaces reth1.71 family inet filter input ISP-INPUT-FILTER

     

    set  firewall filter ISP-INPUT-FILTER term ROUTE-OVER-TWC from source-address 10.224.2.11

    set  firewall filter ISP-INPUT-FILTER term ROUTE-OVER-TWC then routing-instance routing-table-TWC

    set  routing-instances routing-table-TWC routing-options static route 0.0.0.0/0 next-hop 97.77.62.9

    set  routing-instances routing-table-TWC instance-type forwarding

     

    set  firewall filter ISP-INPUT-FILTER term ROUTE-OVER-XO from source-address 10.224.0.0/24

    set  firewall filter ISP-INPUT-FILTER term ROUTE-OVER-XO then routing-instance routing-table-XO

    set  routing-instances routing-table-XO routing-options static route 0.0.0.0/0 next-hop 216.1.170.253

    set  routing-instances routing-table-XO routing-options static route 0.0.0.0/0 qualified-next-hop 97.77.62.9 preference 100

    set  routing-instances routing-table-XO instance-type forwarding

     

     

    set  routing-options rib-groups FBF-GROUP import-rib inet.0

    set  routing-options rib-groups FBF-GROUP import-rib routing-table-XO.inet.0

    set  routing-options rib-groups FBF-GROUP import-rib routing-table-TWC.inet.0



  • 2.  RE: FBF - Policy Based Routing

    Posted 01-26-2015 08:48

    Hi.

     

    You miss to import connected interface from inet.0 to routing-table-XO

     

     



  • 3.  RE: FBF - Policy Based Routing

    Posted 01-26-2015 13:33

    Thanks for your response. 

     

    Do you mind writing it out in a set command, I think I'm slightly confused at the written out set statement.



  • 4.  RE: FBF - Policy Based Routing
    Best Answer

    Posted 01-26-2015 18:50

    Hi.

     

    You need add these commands.

    set routing-options interface-routes rib-group inet FBF-GROUP

    set routing-options rib-groups FBF-GROUP import-rib inet.0

    set  routing-options rib-groups FBF-GROUP import-rib routing-table-XO.inet.0

    set  routing-options rib-groups FBF-GROUP import-rib routing-table-TWC.inet.0



  • 5.  RE: FBF - Policy Based Routing

    Posted 01-27-2015 11:10

    I thought so but I didnt want to assume. I'm testing tonight. Once I confirm things are working I will mark your comment as the solution. 

     

    Thanks