Note this is a VPLS/DIA link. Portion is used from for DIA other portion is used for our corporate MPLS.
The configs below are my attempt at setting this up. I can see the route in the routing table and the route was NOT in a reject state.
Performing a traceroute or ping produced no results, but I could see a trickle amount of traffic over the link.
Am I missing something?
Config below
set routing-options static route 0.0.0.0/0 next-hop 216.1.170.253
set routing-options static route 0.0.0.0/0 qualified-next-hop 97.77.62.9 preference 100
set interfaces ge-0/0/8 vlan-tagging
set interfaces ge-0/0/8 mtu 9000
set interfaces ge-0/0/8 unit 100 vlan-id 100
set interfaces ge-0/0/8 unit 100 family inet address 216.1.170.254/30
set interfaces ge-0/0/8 unit 900 family inet address 10.160.255.5/26
set interfaces ge-0/0/8 unit 900 vlan-id 900
set security zones security-zone UNTRUST interfaces ge-0/0/8.100 host-inbound-traffic system-services all
set security zones security-zone PLN1-MPLS-WAN interfaces ge-0/0/8.900 host-inbound-traffic system-services all