03-12-2012 09:44 PM
Can someone show me how to do route leak from VRF to main routing table and vice versa. The main point is to make sure PE2 can ping ip interfcae CE1 / loppback ip CE1. I already search and result is refering to rib-group. But when i test is cannot success. Below is my connection:
PE2 <----->PE1(vrf-using OSPF/BGP)---->CE1
Hopefully can someone guide me...Thanks and appreciate feedback.
03-12-2012 11:33 PM
You can use rib-group to import routes between routing-tables:
Below knowledge base with an example for you~
03-13-2012 01:11 AM
Many thanks for the URL....Refering to that KB is too simple...without diagram...Is it same as my diagram. FYI i have exprienced configure RIB-group but its for one router with dua ISP (internet). But now the design is diffrent. Apprecaite your feedback. Thanks again
03-13-2012 01:31 AM
I think the example is quiet similar to your scenario (just the protocol is using ISIS in its case).
In your scenario you will have two routing-tables @PE1 (One for VRF and one for global). You can just combine them @PE1 with the sample configuration
03-13-2012 09:12 PM
Problem is solved. I refer to this URL http://www.gossamer-threads.com/lists/nsp/ipv6/178