Routing
Reply
Visitor
rpakalns
Posts: 4
Registered: ‎05-10-2010
0

ISIS neighborship through l3-interface

Hi!

 

I've been trying to configure ISIS between two vlan interfaces on two SRX-210 routers and cannot succeed.

 

The problem is that I cannot see the vlan.1133 interface in show isis interfaces

 

Although, if I make it a passive interface under protocols isis, it shows up, but, of course, the relationship does not go up. Is it a licensing issue or I just don't understand something...

 

Model: srx210-lm
JUNOS Software Release [10.0R1.8]

 

Thank's,

Roberts

Visitor
rpakalns
Posts: 4
Registered: ‎05-10-2010
0

Re: ISIS neighborship through l3-interface

OK, on routed interfaces it works fine, so the question is where is the problem with subinterfaces...

 

Thank's!

Visitor
rpakalns
Posts: 4
Registered: ‎05-10-2010
0

Re: ISIS neighborship through l3-interface

Ok, it works also with subinterfaces, but still does not work with "l3-interfaces", although it's good enough for me. Anyway, maybe somebody knows why it does not work with l3-interfaces?

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.