Hi All,
I have 4 logical routers LDP configured .
in inet.3 routing table only 3 entries are observed
root@JTB_MX80_1# run show route protocol ldp logical-system p1
inet.0: 23 destinations, 23 routes (23 active, 0 holddown, 0 hidden)
inet.3: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
192.168.1.1/32 *[LDP/9] 1d 01:37:44, metric 1
> to 172.22.210.1 via lt-1/0/0.220
192.168.5.2/32 *[LDP/9] 1d 01:37:43, metric 1
> to 172.22.201.2 via lt-1/1/0.11
192.168.5.3/32 *[LDP/9] 09:00:43, metric 1
> to 172.22.201.2 via lt-1/1/0.11, Push 299936
mpls.0: 12 destinations, 12 routes (12 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
299904 *[LDP/9] 1d 01:37:44, metric 1
> to 172.22.210.1 via lt-1/0/0.220, Pop
299904(S=0) *[LDP/9] 1d 01:37:44, metric 1
> to 172.22.210.1 via lt-1/0/0.220, Pop
299920 *[LDP/9] 1d 01:37:43, metric 1
> to 172.22.201.2 via lt-1/1/0.11, Pop
299920(S=0) *[LDP/9] 1d 01:37:43, metric 1
> to 172.22.201.2 via lt-1/1/0.11, Pop
299936 *[LDP/9] 09:00:43, metric 1
> to 172.22.201.2 via lt-1/1/0.11, Swap 299936
However, in LDP database we have two different paths
root@JTB_MX80_1# run show ldp database logical-system p1
Input label database, 192.168.5.1:0--192.168.1.1:0
Label Prefix
3 192.168.1.1/32
299904 192.168.5.1/32
299936 192.168.5.2/32
299952 192.168.5.3/32
Output label database, 192.168.5.1:0--192.168.1.1:0
Label Prefix
299904 192.168.1.1/32
3 192.168.5.1/32
299920 192.168.5.2/32
299936 192.168.5.3/32
Input label database, 192.168.5.1:0--192.168.5.2:0
Label Prefix
299920 192.168.1.1/32
299888 192.168.5.1/32
3 192.168.5.2/32
299936 192.168.5.3/32
Output label database, 192.168.5.1:0--192.168.5.2:0
Label Prefix
299904 192.168.1.1/32
3 192.168.5.1/32
299920 192.168.5.2/32
299936 192.168.5.3/32
Why there is no label operation for the path 192.168.5.1:0--192.168.5.2:0
Br,
Serkan