Hello forum guys,
I have installed MIC card for MX80 router. I did followingsteps:
1) Router was upgraded to newst soft 15.1.
admin@MX-80-1-Feve3-Rack-21# run show version
Hostname: MX-80-1-Feve3-Rack-21
Model: mx80
Junos: 15.1F2.8
JUNOS Base OS boot [15.1F2.8]
JUNOS Base OS Software Suite [15.1F2.8]
JUNOS Packet Forwarding Engine Support (MX80) [15.1F2.8]
JUNOS Web Management [15.1F2.8]
JUNOS Online Documentation [15.1F2.8]
JUNOS Services Application Level Gateways [15.1F2.8]
JUNOS Services Jflow Container package [15.1F2.8]
JUNOS Services Stateful Firewall [15.1F2.8]
JUNOS Services NAT [15.1F2.8]
JUNOS Services RPM [15.1F2.8]
JUNOS Kernel Software Suite [15.1F2.8]
JUNOS Routing Software Suite [15.1F2.8]
2.MIC card (hot swappable) was instred to the available slot 1 without router reset.
3.to bring card online, I typed:
admin@MX-80-2-Feve3-Rack-21# run request chassis mic fpc-slot 1 mic-slot 1 online
FPC 1, MIC 1 does not support this command
4. Afer I checked card status, I got message " not supported"
admin@MX-80-2-Feve3-Rack-21# run show chassis fpc pic-status
Slot 0 Online
PIC 0 Online 4x 10GE XFP
Slot 1 Online
PIC 0 Online 10x 1GE(LAN) SFP
PIC 1 Online 10x 1GE(LAN) SFP
PIC 2 Present MS-MIC-16G- Not Supported
5. No LED light on MIC card - card is dead!
Is there anything I forget to do? I tried diffrent combination for " run request chassis mic ... " command and all return same output:
FPC 1, MIC 1 does not support this command
Please help