thanks for looking into this Alex
The only thing I was missing from previuos tests is that mac address that you added in port xe-0/1/0. I'm assuming that's the mac address of your analyzer PC ?
I tried to add the mac address that I use with Wireshark running, but I still cannot see mirrored packets to that PC. I checked the port counters on that port but can't see anything going out to the analyzer.
this is the config I used: Any other ideas?
carlos@MX80-1# show forwarding-options
port-mirroring {
input {
rate 1;
run-length 1;
}
family inet {
output {
interface ge-1/2/9.0 {
next-hop 9.9.9.2;
}
no-filter-check;
}
}
}
carlos@MX80-1# show firewall
family inet {
filter inetMirrorFilter {
interface-specific;
term all {
then {
count mirror;
port-mirror;
accept;
}
}
}
}
carlos@MX80-1# show interfaces ge-1/2/0
unit 0 {
family inet {
filter {
input inetMirrorFilter;
}
address 192.7.7.1/30;
}
}
carlos@MX80-1# show interfaces ge-1/2/9
unit 0 {
family inet {
address 9.9.9.1/30 {
arp 9.9.9.2 mac d8:d3:85:99:3f:77;
}
}
}
cheers