We have new MX240 with two routing engines. Each routing engine has a card (XGE) with twp SFP ports.. I think they are the CB 0 and CB1. We don't see those 4 interfaces when we issue "show interfaces ". Can those interfaces used for network connectivity (to other switches and/or routers)? do they support 10G SFP? How to enable them?
We issues the command "set system network-services enhanced-ip" but that didn't help
show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis JN125ADCCAFC MX240
Midplane REV 04 750-047865 ACRF8986 Enhanced MX240 Backplane
FPM Board REV 04 760-021392 ABDE4335 Front Panel Display
PEM 0 Rev 11 740-029970 QCS1544U1PE PS 1.4-2.52kW; 90-264V AC in
PEM 1 Rev 11 740-029970 QCS1544U1LR PS 1.4-2.52kW; 90-264V AC in
PEM 2 Rev 11 740-029970 QCS1544U1LT PS 1.4-2.52kW; 90-264V AC in
PEM 3 Rev 11 740-029970 QCS1544U1PA PS 1.4-2.52kW; 90-264V AC in
Routing Engine 0 REV 11 740-031116 9009256147 RE-S-1800x4
Routing Engine 1 REV 11 740-031116 9009255897 RE-S-1800x4
CB 0 REV 08 750-055976 CAFW7761 Enhanced MX SCB 2
CB 1 REV 08 750-055976 CAFR4747 Enhanced MX SCB 2
FPC 1 REV 11 750-054904 CAEL5200 MPC2E NG PQ & Flex Q
CPU REV 12 711-045719 CAEL4676 RMPC PMB
MIC 0 REV 32 750-028392 CAGA4573 3D 20x 1GE(LAN) SFP
PIC 0 BUILTIN BUILTIN 10x 1GE(LAN) SFP
PIC 1 BUILTIN BUILTIN 10x 1GE(LAN) SFP
---(more)--- Fan Tray 0