Routing

last person joined: 4 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

  • 1.  MX80 license

    Posted 02-26-2015 01:18

    hi all,

     

    i have some requierement for new site the spes

     

    MX80-48T (MX80-48T chassis with 48x1GE, 4x10GE, AC power supply, Fan Tray w/Filter, JUNOS-WW
    -Support GRE Tunnel, OSPF,MPLS and BGP 4byte ASN
    - 4x10G interface
    - 48 GE copper Interface
    - JUNOS WW update
    - Power cable
    - Juniper Standard Support

     

     

    the license to be used =

     

    S-MX80-ADV-R = License to support full scale L3 route and L3 VPN on MX80
    Advanced Routing License to Support high scale IPv4 routes and L3VPN; Increases IPv4 scale to 1M routes from 32K routes available on JUNOS"

     


    S-MX80-SA-FP = Subscriber Management Feature Pack License
    16000 PPPoE or DHCP subs
    4000 L2TP subs
    80 Gbps throuhgput

    S-MX80-SSM-FP = Subscriber Service Management Feature
    Packet License (RADIUS/SRC Series-based service activation and deactivation) per service accounting features for subscribers, MX80

     

     

    //not used

     

    S-MX80-Q = License to support per VLAN queuing on MX80
    only available on modular MX80 example =MIC-3D-4CHOC3-2CHOC12

     

     

     

     

    I am still confused whether about these license

    S-SSP-FP    Subscriber Traffic Lawful Intercept Feature Pack License, MX and M Series

    and

    VCPE-1000    Virtual CPE for 1,000 enterprise sites

     

     

    anyone can exlpain me

     

    thanks,

     

     



  • 2.  RE: MX80 license
    Best Answer

     
    Posted 02-27-2015 02:33

    The S-SSP-FP    Subscriber Traffic Lawful Intercept Feature Pack License, MX and M Series

    you need when you want to do lawful intercept of traffic of PPP/DHCP subscribers when you MX series device is running as BRAS. You then can place a flow tap on a subscriber en deliver all traffic to a thirdparty box to send the traffic towards

    the "authorithies" or use it to do some annalyses yourself.

     

     

     

    and

    VCPE-1000    Virtual CPE for 1,000 enterprise sites You can run a Virtual CPE for your customers, instead of putting a CPE with active config at the client side. You need some kind of "dump terminal" at the client location and can run the CPE functionality on your MX series device



  • 3.  RE: MX80 license

     
    Posted 03-01-2015 23:20

    Was this enough info for you ?



  • 4.  RE: MX80 license

    Posted 03-12-2015 02:04

    hai mr marc Tb,

     

     

    could you please

     


    whether it can be included literature or data sheet can let me learn more about license mx80