Routing

last person joined: 2 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

  • 1.  One public network and two private networks - routing

    Posted 07-06-2011 03:20

    Hello,

     

    We have a problem with configuring (routing) two private networks on one firewall.

     

    Situation:

     

    Juniper SSG 350M

    Public ip range 192.87.x.x on port 3/0

    Private ip range 172.31.x.x on port 3/1

    this is working as it should be.

     

    Now we want to add a new private network to the Juniper with ip range 10.10.x.x on port 1/0

     

    Somehow we can’t get this to work to have internet communication from inside to outside and from outside to inside.  I think it has something to do with the routing options, but I’m not sure about this.

     

    Can someone provide me with the accurate documentation to get this to work?   Or maybe a simple explanation how to configure this in the WebUI.

     

    Regards,

     

    Frank



  • 2.  RE: One public network and two private networks - routing
    Best Answer

    Posted 07-06-2011 04:45

    You have to check your NAT configuration and add the new 10.10.x.x to NAT rules



  • 3.  RE: One public network and two private networks - routing

    Posted 07-06-2011 06:15

    Thanks Dimitru for your anser.

     

    Please can you tell me where I can see this in the WebUI ?

     

    Regards,

     

    Frank



  • 4.  RE: One public network and two private networks - routing

    Posted 07-06-2011 06:33

    Dimitru,

     

    We found it. We had the MIP addresses on the wrong interface 🙂 🙂

     

    Regards,

     

    Frank