Routing

last person joined: 3 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

  • 1.  Ospf neighbors change

    Posted 11-23-2015 11:43

    Hello! There is such topology. The preferred path for routes is through interface Ge-0/0/1. 

     

    Question: When I enter command clear ospf neighbor interface ge-0/0/1 , at what time will be path through interface ge-0/0/0 preferred?

     

    Maybe ,outline the process, please!

     

    ospf-neigh.png

     



  • 2.  RE: Ospf neighbors change
    Best Answer

     
    Posted 11-25-2015 02:55

    The default dead time is 40 seconds, so after 40 seconds OSPF will recalcualte.  The issue with the clear command is the interface will come back up almost instantaneously.  If you want to test it properly I'd suggest you shutdown the interface.

     

    HTH

    Mas



  • 3.  RE: Ospf neighbors change

    Posted 11-25-2015 03:16

    And So, backup path will be established during 40 s.  After this primary  path will be restored.

     

    msarwar,thx!



  • 4.  RE: Ospf neighbors change

    Posted 11-25-2015 03:22

    Hello,

    There is no Dead timer involved in "clear ospf neighbor" scenario.

    The router where this command is issued, will send out Hello _WITHOUT_ given neighbor and opposite router on same link will drop the adjacency with that router with reason "Not seeing self".

    Then both routers will start to build adjacency from scratch - first Init, then 2-way, ExchangeStart, Exchange to Full. 

    HTH

    Thx

    Alex