Routing

last person joined: 3 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

  • 1.  Route based VPN between MX and SRX

     
    Posted 01-26-2016 06:57

    I am trying to establish an IPsec tunnel between an SRX210 and MX80 but without success. The MX shows the following logs:

     

    lab@CORE_RTR_B> show log ike.log    
    Jan 26 14:41:55 CORE_RTR_B clear-log[34220]: logfile cleared
    Jan 26 14:42:34 [10.18.129.137 <-> 10.18.129.142] ikev2_udp_recv: Unexpected IKE packet received on routing table id: 0, with local address: 10.18.129.137 and remote address: 10.18.129.142
    Jan 26 14:42:44 [10.18.129.137 <-> 10.18.129.142] ikev2_udp_recv: Unexpected IKE packet received on routing table id: 0, with local address: 10.18.129.137 and remote address: 10.18.129.142

     

    The endpoint addresses 10.18.129.137 & 10.18.129.142 have reachibility with a router inbetween.

     

    Can anyone point out where I have gone wrong please?

    Attachment(s)

    txt
    MX80.txt   3 KB 1 version
    txt
    SRX210.txt   4 KB 1 version


  • 2.  RE: Route based VPN between MX and SRX
    Best Answer

    Posted 01-26-2016 08:20

    Hello,

    Do You actually have MS-MIC in Your MX80 rear slot?

    If yes then it cannot have its interfaces designated as "ms-0/0/0", 0/0/0 is for 10GE front ports.

    It should be ms-0/2/0.

    HTH

    Thx
    Alex



  • 3.  RE: Route based VPN between MX and SRX

     
    Posted 01-26-2016 12:13

    Yes I do. Well spotted. I have changed that and now it works!

     

    Thanks