Hello Community.
I hope you are all fine today.
I am trying to set in my lab a VPLS conection between 2 SRXs. I know that this is not the SRX threat but I thought the issue fits better here.
I am trying to set a VPLS between 2 SRX. I've managed to do it. however I dont see to be able to ping across my 2 servers.
This is the config performed on the SRX210
ge-0/0/0 {
description TO_SRX_220;
unit 0 {
family inet {
address 10.0.248.166/22;
}
family mpls;
}
}
fe-0/0/2 {
description TO_WINDOWS_SERVER
vlan-tagging;
encapsulation vlan-vpls;
unit 660 {
encapsulation vlan-vpls;
vlan-id 660;
family vpls;
}
}
lo0 {
unit 0 {
family inet {
address 1.1.1.1/32;
}
I am running OSPF between the SRXs as IGP and MPLS and LDP on all interfaces
show protocols
mpls {
interface all;
}
ospf {
area 0.0.0.0 {
interface ge-0/0/0.0;
interface lo0.0 {
passive;
}
}
}
ldp {
interface all;
the VPLS instance has been set as well
jchaves@SRX210HE# show routing-instances
VPLS {
instance-type vpls;
interface fe-0/0/2.660;
protocols {
vpls {
no-tunnel-services;
vpls-id 660;
neighbor 2.2.2.2;
*************Config on second SRX220*************
jchaves# show interfaces
ge-0/0/0 {
description TO_SRX_210;
unit 0 {
family inet {
address 10.0.248.188/22;
}
family mpls;
}
}
ge-0/0/1 {
description TO_MAC_OS;
vlan-tagging;
encapsulation vlan-vpls;
unit 660 {
encapsulation vlan-vpls;
vlan-id 660;
family vpls;
}
}
lo0 {
unit 0 {
family inet {
address 2.2.2.2/32;
}
Protocols config
jchaves# show protocols
mpls {
interface all;
}
ospf {
area 0.0.0.0 {
interface ge-0/0/0.0;
interface lo0.0 {
passive;
}
}
}
ldp {
interface all;
}
the VPLS instance
jchaves# show routing-instances
VPLS {
instance-type vpls;
interface ge-0/0/1.660;
protocols {
vpls {
no-tunnel-services;
vpls-id 660;
neighbor 1.1.1.1;
OK. So the conig has been listed. I know that something is missing as I am unable to ping my windows server from my MAC and vicebersa.
This is the MPLS, LDP and VPLS status.
jchaves@SRX210HE# run show mpls interface
Interface State Administrative groups (x: extended)
ge-0/0/0.0 Up <none>
jchaves@SRX210HE# run show ldp interface
Interface Label space ID Nbr count Next hello
lo0.0 1.1.1.1:0 2 0
ge-0/0/0.0 1.1.1.1:0 1 2
jchaves@SRX210HE# run show ldp statistics
Message type Total Last 5 seconds
Sent Received Sent Received
Hello 3907 3408 2 1
Initialization 2 2 0 0
Keepalive 1118 1116 1 1
Notification 1 0 0 0
Address 2 2 0 0
Address withdraw 0 0 0 0
Label mapping 7 11 0 0
Label request 0 0 0 0
Label withdraw 2 7 0 0
Label release 7 2 0 0
Label abort 0 0 0 0
All UDP 3907 3408 2 1
All TCP 1138 1140 1 1
Event type Total Last 5 seconds
Sessions opened 2 0
Sessions closed 1 0
Topology changes 6 0
No router id 0 0
No address 0 0
No interface 0 0
No session 0 0
No adjacency 0 0
Unknown version 0 0
Malformed PDU 0 0
Malformed message 0 0
Unknown message type 0 0
Inappropriate message 0 0
Malformed TLV 0 0
Bad TLV value 0 0
Missing TLV 0 0
PDU too large 0 0
PDU too small 0 0
Instance: VPLS
VPLS-id: 660
Neighbor Type St Time last up # Up trans
192.168.1.200(vpls-id 660) rmt OL <<<<<<<<<<<<<<<<<<<<<<<<<<<Coudl this be the problem?
2.2.2.2(vpls-id 660) rmt Up May 31 20:32:57 2017 1
Remote PE: 2.2.2.2, Negotiated control-word: No
Incoming label: 262145, Outgoing label: 262145
Negotiated PW status TLV: No
Local interface: lsi.1049344, Status: Up, Encapsulation: ETHERNET
Description: Intf - vpls VPLS neighbor 2.2.2.2 vpls-id 660
Let me know if more info is needed.
Thanks in advanced.