02-06-2012 02:46 AM
what is the equivalent of "show bgp vpn4 rvf" cisco command in Juniper?
Solved! Go to Solution.
02-06-2012 07:52 AM
Hi Rami,
Each VRF has separate routing table you could see all routes from this command
show route table <VRF name>
You could also use this command to check
show route table bgp.l3vpn.0
Regards,
Mohamed Elhariry
JNCIE-M/T # 1059, CCNP & CCIP
----------------------------------------------------------------------------------------------------------------------------------------If this post was helpful, please mark this post as an "Accepted Solution".Kudos are always appreciated!
