Routing
Reply
Visitor
ramipitt
Posts: 1
Registered: ‎06-10-2011
0
Accepted Solution

VPNV4 VRF

what is the equivalent of "show bgp vpn4 rvf" cisco command in Juniper?

Rami Ismaeil
JNCIA - JUNOS, JNCIS - SEC, JNCIS - ENT
Recognized Expert
mhariry
Posts: 287
Registered: ‎06-01-2011
0

Re: VPNV4 VRF

Hi Rami,

 

Each VRF has separate routing table you could see all routes from this command

 

show route table <VRF name>

 

You could also use this command to check

 

show route table bgp.l3vpn.0

 

 

Regards,

 

Mohamed Elhariry

 

JNCIE-M/T # 1059, CCNP & CCIP

 

 

 

----------------------------------------------------------------------------------------------------------------------------------------

If this post was helpful, please mark this post as an "Accepted Solution".Kudos are always appreciated!


Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.