Hi kronicklez,
Please don't be sorry, I would be very glad to help and answer your queries at any time.
In oder to get that information you need to fallback to retrieve the primary LSP rsvp session details as below, where highlighted portion whill indicate which Bypass LSP is being used by this primary LSP.
egress@prussia> show rsvp session lsp extensive
Ingress RSVP: 1032 sessions
10.255.5.43
From: 10.255.14.110, LSPstate: Up, ActiveRoute: 0
LSPname: R1_R2_LSP_1, LSPpath: Primary
Suggested label received: -, Suggested label sent: -
Recovery label received: -, Recovery label sent: 429296
Resv style: 1 SE, Label in: -, Label out: 429296
Time left: -, Since: Mon Nov 2 15:29:19 2009
Tspec: rate 0bps size 0bps peak Infbps m 20 M 1500
Port number: sender 1 receiver 37394 protocol 0
Link protection desired
Type: Link protected LSP, using Bypass->11.1.1.1
35 Nov 2 16:57:46 Link protection up, using Bypass->11.1.1.1
AFAIK there isn't a single command to get all primary LSPs associated with Bypass LSP, but you can play around with "match" criteria like below
show rsvp session extensive | match "LSPname|Type: Link protected LSP"
Regards
Surya