Routing
Reply
Visitor
steelfox
Posts: 7
Registered: ‎08-15-2008
0
Accepted Solution

multicast VPN AD

hi all:

 

reading junos docs and have a question for flollowing sentance:

 

"The route targets configured under multicast VPNs apply only to multicast VPN AD routes of type 1, 2, 3, and 5"

 

1) what does this "AD" stand for?

2) what are those types of 1, 2, 3, and 5?

 

thanks

Recognized Expert
benb
Posts: 204
Registered: ‎11-05-2007

Re: multicast VPN AD

AD stands for auto-discovery.  These are multicast-vpn nlri route-types.  Below are the definitions, and a link to the draft, where they are defined.

 

http://tools.ietf.org/id/draft-ietf-l3vpn-2547bis-mcast-bgp-05.txt

 

     + 1 - Intra-AS I-PMSI A-D route;
     + 2 - Inter-AS I-PMSI A-D route;
     + 3 - S-PMSI A-D route;
     + 4 - Leaf A-D route;
     + 5 - Source Active A-D route.

 

Regards,

Ben

 

Visitor
steelfox
Posts: 7
Registered: ‎08-15-2008
0

Re: multicast VPN AD

Thanks.
Contributor
Bilal
Posts: 20
Registered: ‎05-08-2008
0

Re: multicast VPN AD

Can MVPN take advantage of P2MP LSP?

If P2MP LSP is in one AS whereas PIM-SM in other AS, can MVPN aleviate need of PIM-SM in the AS whereas P2MP LSP or VPLS is deployed?

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.